OBTENIM TARIFES!!
SKIN: 2 SESSION[tarifa_web]:
Array
(
    [id] => PVD
    [id_parent] => 0
    [id_divisa] => 2
    [currency] => USD
)

SEARCH RESULTS: Curve Diam. 35

ATTENTION: GPR's Adapter fitting is made of high-quality 304 stainless steel. It permits a seamless connection from the GPR silencers to the motorbile's original manifolds. IMPORTANT: Any cutting or modification of the original manifold must be performed by a qualified mechanic.
Cafè Racer
C.35

Cafè Racer Curva inox - Inox Curve Diam 35

Curva inox - Inox Curve Diam 35

Curve Diam. 35
C.35
InStock 31/12/2039 USD $42.90 USD $32.17
View more
ATTENTION: GPR's Adapter fitting is made of high-quality 304 stainless steel. It permits a seamless connection from the GPR silencers to the motorbile's original manifolds. IMPORTANT: Any cutting or modification of the original manifold must be performed by a qualified mechanic.
Cafè Racer
C.38

Cafè Racer Curva inox - Inox Curve Diam 38

Curva inox - Inox Curve Diam 38

Curve Diam. 38
C.38
InStock 31/12/2039 USD $30.80 USD $23.10
View more
ATTENTION: GPR's Adapter fitting is made of high-quality 304 stainless steel. It permits a seamless connection from the GPR silencers to the motorbile's original manifolds. IMPORTANT: Any cutting or modification of the original manifold must be performed by a qualified mechanic.
Cafè Racer
C.52

Cafè Racer Curva inox - Inox Curve Diam 52

Curva inox - Inox Curve Diam 52

Curve Diam. 52
C.52
InStock 31/12/2039 USD $42.90 USD $32.17
View more
ATTENTION: GPR's Adapter fitting is made of high-quality 304 stainless steel. It permits a seamless connection from the GPR silencers to the motorbile's original manifolds. IMPORTANT: Any cutting or modification of the original manifold must be performed by a qualified mechanic.
Cafè Racer
C.45

Cafè Racer Curva inox - Inox Curve Diam 45

Curva inox - Inox Curve Diam 45

Curve Diam. 45
C.45
InStock 31/12/2039 USD $42.90 USD $32.17
View more
Fits without the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.4.ALB

ROYAL ENFIELD Himalayan 410 Diam.36mm 2017>2020

Albus Ceramic

Slip-on exhaust including link pipe and removable db killer
ROY.4.ALB
Note: Fits without the original gasket
InStock 31/12/2039 USD $467.50 USD $350.62
View more
Kit removes the original catalyst For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube.
For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses.
GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation.
This kit includes the specific lnik pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.4.RACE.DE

ROYAL ENFIELD Himalayan 410 2017/2020 e4 D.36

Deeptone Inox

Slip-on exhaust including link pipe
ROY.4.RACE.DE
Note: Kit removes the original catalyst
InStock 31/12/2039 USD $275.00 USD $206.25
View more
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.4.DBHOM.DE

ROYAL ENFIELD Himalayan 410 Diam.36mm 2017>2020

Deeptone Inox

Slip-on exhaust including link pipe and removable db killer
ROY.4.DBHOM.DE
InStock 31/12/2039 USD $275.00 USD $206.25
View more
Fits without the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.4.FUNE

ROYAL ENFIELD Himalayan 410 Diam.36mm 2017>2020

Furore Nero

Slip-on exhaust including link pipe and removable db killer
ROY.4.FUNE
Note: Fits without the original gasket
InStock 31/12/2039 USD $407.00 USD $305.25
View more
Fits without the original gasket For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube.
For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses.
GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation.
This kit includes the specific lnik pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.4.RACE.FUNE

ROYAL ENFIELD Himalayan 410 2017/2020 e4 D.36

Furore Nero

Slip-on exhaust including link pipe
ROY.4.RACE.FUNE
Note: Fits without the original gasket
InStock 31/12/2039 USD $374.00 USD $280.50
View more
Fits without the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.4.PCEV

ROYAL ENFIELD Himalayan 410 Diam.36mm 2017>2020

Powercone Evo

Slip-on exhaust including link pipe and removable db killer
ROY.4.PCEV
Note: Fits without the original gasket
InStock 31/12/2039 USD $510.40 USD $382.80
View more
For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube.
For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses.
GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation.
Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
ROYAL ENFIELD
ROY.5.1.DEC

ROYAL ENFIELD Himalayan 410 2017/2020 e4 D.36

Decatalizzatore

Decat pipe
ROY.5.1.DEC
InStock 31/12/2039 USD $411.40 USD $308.55
View more
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.

For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.

The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.

The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.

GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This kit includes the specific lnik pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
TRIUMPH
BRK24.T.101.HYFUTO

TRIUMPH Tiger 900 2024/2025 GT / Pro / Rally Pro

Hyper Furore Titanium

Slip-on exhaust including removable db killer and link pipe
BRK24.T.101.HYFUTO
InStock 31/12/2039 USD $539.00 USD $404.25
View more
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.

For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.

The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.

The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.

GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This is not a plug-and-play installation. Due to the complexity, the installation requires a professional shop that specializes in Cafè Racers. The installation requires installing, cutting the original header and creating the connection to the silencer directly on the motorbike. This kit does not include link pipes, and the professional mechanic must manufacture or create a link pipe and fitting.
Tuning
TUNING.RACE.14

Tuning M3 Inox L.200mm DIAM.100mm

M3 Inox

Universal silencer, without link pipe
TUNING.RACE.14
InStock 31/12/2039 USD $355.30 USD $266.48
View more
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.

For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.

The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.

The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.

GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This is not a plug-and-play installation. Due to the complexity, the installation requires a professional shop that specializes in Cafè Racers. The installation requires installing, cutting the original header and creating the connection to the silencer directly on the motorbike. This kit does not include link pipes, and the professional mechanic must manufacture or create a link pipe and fitting.
Tuning
TUNING.RACE.15

Tuning M3 Inox L.310mm DIAM.100mm

M3 Inox

Universal silencer, without link pipe
TUNING.RACE.15
InStock 31/12/2039 USD $355.30 USD $266.48
View more
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.

For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.

The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.

The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.

GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This is not a plug-and-play installation. Due to the complexity, the installation requires a professional shop that specializes in Cafè Racers. The installation requires installing, cutting the original header and creating the connection to the silencer directly on the motorbike. This kit does not include link pipes, and the professional mechanic must manufacture or create a link pipe and fitting.
Tuning
TUNING.RACE.16

Tuning M3 Titanium L.200mm DIAM.100mm

M3 Titanium Natural

Universal silencer, without link pipe
TUNING.RACE.16
InStock 31/12/2039 USD $444.40 USD $333.30
View more
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.

For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.

The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.

The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.

GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This is not a plug-and-play installation. Due to the complexity, the installation requires a professional shop that specializes in Cafè Racers. The installation requires installing, cutting the original header and creating the connection to the silencer directly on the motorbike. This kit does not include link pipes, and the professional mechanic must manufacture or create a link pipe and fitting.
Tuning
TUNING.RACE.17

Tuning M3 Titanium L.310mm DIAM.100mm

M3 Titanium Natural

Universal silencer, without link pipe
TUNING.RACE.17
InStock 31/12/2039 USD $444.40 USD $333.30
View more
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Authorized cookies:
Manage preferences